-
Extech MO290-EP
The Extech MO290-EP is an Extension Moisture Probe with dual sharp pins. The pins measure 8.5 cm (3.4 in) long, and a cable length of 76 cm (30 in). Moisture Probe can be used with MO290-EXT Moisture Probe Extenders to increase the working distance of the probe up to 58cm (23 in) when 2 extenders are combined together.
-
Extech RHT510
Extech RHT510 湿度温度計で湿度、温度、気象条件を簡単にチェックできます。このメーターは、温度測定値(空気およびタイプK)、相対湿度、湿球、露点を表示できます。付属のビードワイヤタイプKプローブは、250°Cまでの温度測定に使用できますが、他のプローブと併用すると1300°Cまで測定できます。Min/Max機能を使用して、最高値と最低値を呼び出します。また、RHT510はバックライト付きLCDを搭載しており、データホールドと自動電源オフ(無効化オプション付き)を表示します。
-
Extech DAT12
Extech DAT12は、MO55WおよびMM750W用の交換用Bluetoothデータロギングモジュールです。
-
Extech 380926
Extech 380926は、500 MCMケーブル2本を収納できる頑丈なジョーを備えた、カテゴリIV、2000-Amp、TRMS AC/DCクランプメーターです。内蔵のフル機能DMMは、AC/DCの電圧と電流、抵抗、静電容量、周波数、デューティサイクル、ダイオード、導通を測定できます。4000カウントの大型バックライトディスプレイに測定値が表示され、薄暗い場所でも見やすいようになっています。その他、DCA押しボタンゼロ、データホールド、および相対機能などの機能を備えています。テストリードと9Vバッテリーを装備。
-
Extech RH550-P
The Extech RH550-P is a spare/replacement Humidity and Temperature Probe for the RH550. The probe can either be clipped directly onto the tablet (RH550) or attached to a cable (RH550-C) to measure humidity and temperature. Field-replaceable probe does not require recalibration.
-
Extech CLT-ADP-EU
Extech CLT-ADP-EUは、ヨーロッパ用2ピン式タイプCプラグ付きソケットアダプターです。CLT600高度ケーブルロケーター・トレーサーキットとの互換性があり、タイプCプラグの近くで簡単にテストができます。
-
Extech LCR203
The Extech LCR203 are SMD Component Tweezers for use with Extech's LCR200 LCR Meter. These tweezers make it easy to test and sort simultaneously for single handed operation. Tweezers complete the circuit with components easier than separate test leads. Comes with a 6 month warranty.
-
Extech 380405
Extech 380405 キャパシタンスディケードボックスは、標準値を持つ任意のコンポーネントの代わりとして、回路や機能に簡単に代用できるため、製品設計テストや校正用に非常に人気があります。あるいは、回路動作の最良値を識別し、スイッチから特定値を読み取るために使用することもできます。その後、ディケードボックススイッチによって示されるサイズのコンデンサを回路に組み込むことができます。
-
Cable Accessory Port
Cable accessory port for Vue Pro
-
Extech 461957
Extech 461957は光電センサーです。本製品は、461950パネルタコメーター用です。最大6000rpm(100Hz)の測定範囲を特長とし、目標距離は1センチです。
-
Extech EX800
The Extech EX800 ExStik® 3-In-1 Kit includes the CL200 meter and pH electrode, reagent tablets (50 tests), four plastic cups, a weighted stand, pH buffer pouches, four CR2032 batteries, 121.9 cm (48 in) neck strap, carrying case, and user manual. The meter measures total chlorine, pH, and temperature with interchangeable flat surface electrodes that are included. Flat surface electrodes work in liquids, semi-solids, and solids. The built-in memory can store and recall up to 15 readings and save the last calibrated value. It has a large 3.5 digit (2000 count) digital display with a bargraph and an automatic electronic self-calibration function for chlorine (1, 2, or 3 point buffer calibration for pH).
-
Extech 6015WC
The Extech 6015WC is a Waterproof pH Electrode for use with the PH220-C Waterproof Palm pH Meter. Features an automatic temperature compensation via the built in Pt-100 Ohm sensor, and comes with a 1 m (39 in) cable. Comes with a six month warranty.